Practise important Electromagnetic Induction Class 12 Board Paper MCQs with answers based on previous CBSE board papers, compartment examinations, and sample papers. These questions cover important concepts to help you revise the chapter and prepare effectively for your Class 12 Physics board examination.

Electromagnetic Induction Class 12 Board Paper MCQ
Q. A square loop of side 10 cm is placed vertically in the east-west plane in a uniform magnetic field of 0·2 T directed along the north-east direction. If the magnetic field is reduced to zero in 0·4 s at a steady rate, the magnitude of induced emf will be: (Board Paper Comp 2026)
(A) 3.54 mV
(B) 0·5 V
(C) 5·0 V
(D) 1·0 mV
Answer: (A) 3.54 mV
Explanation:
Area:
$A=(0.1)^2=0.01\ m^2$
Flux:
$\Phi=BA\cos45^\circ$
$\Phi=(0.2)(0.01)\left(\frac{1}{\sqrt2}\right)$
$\Phi=1.414\times10^{-3}\ Wb$
Induced emf:
$e=\frac{\Delta\Phi}{\Delta t}$
$e=\frac{1.414\times10^{-3}}{0.4}$
$e=3.54\times10^{-3}\ V$
$e=3.54\ mV$
Q. Assertion (A) : When a magnet is quickly brought close to one face of a coil whose two ends are not connected to each other, no current flows in the coil.
Reason (R) : Though the emf is induced, but since the coil is not closed, no current flows in the coil. (Board Paper Comp 2026)
(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.
Answer: (A) Both Assertion and Reason are true and Reason is the correct explanation.
Explanation:
According to Faraday’s law, a changing magnetic flux induces an emf in the coil.
Since the coil circuit is open, there is no complete path for charges to flow.
Therefore, emf is induced but current does not flow.
Hence Assertion and Reason both are correct and Reason explains the Assertion.
Q. Assertion (A): If $\vec{B}$ is the magnetic field at a small patch of vector area $\vec{dS}$, then the magnetic flux through the patch will be $\vec{B} \cdot \vec{dS}$.
Reason (R): Magnetic flux is a scalar quantity.(Board Paper Comp 2026)
(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.
Answer: (A) Both Assertion and Reason are true and Reason is the correct explanation.
Explanation:
Magnetic flux through a small area element is defined as
$d\Phi=\vec B\cdot \vec{dS}$
The dot product gives a scalar quantity.
Since magnetic flux is scalar, it is represented by the dot product of magnetic field and area vector.
Therefore both Assertion and Reason are true and Reason correctly explains the Assertion.
Q. An electric current can be induced in a wire loop if – (Board Paper 2026)
(A) the wire loop is wound around a bar magnet.
(B) a bar magnet is placed in contact with the wire loop.
(C) a bar magnet is placed near the wire loop.
(D) a bar magnet is moved rapidly towards the wire loop.
Answer: (D) a bar magnet is moved rapidly towards the wire loop.
Explanation:
Current is induced only when magnetic flux linked with the loop changes.
Simply placing a magnet near or in contact with the loop does not change flux.
Moving the magnet changes the flux and induces emf and current.
Hence (D) is correct.
Q. A square loop of side 50 cm is placed in a uniform magnetic field of 3·0 T acting perpendicular to the plane of the loop. If the loop is rotated through an angle of 90o in 0·3 s, the value of emf induced in the loop would be: (Board Paper 2026)
(A) 2.5 V
(B) 0·50 V
(C) 0·75 V
(D) 1·0 V
Answer: (A) 2.5 V
Explanation:
Area of loop,
$A=(0.5)^2=0.25\ \text{m}^2$
Initial flux,
$\Phi_i=BA$
$\Phi_i=3\times0.25=0.75\ \text{Wb}$
After rotation through $90^\circ$,
$\Phi_f=0$
Change in flux,
$\Delta\Phi=0.75\ \text{Wb}$
Induced emf,
$e=\frac{\Delta\Phi}{\Delta t}$
$e=\frac{0.75}{0.3}$
$e=2.5\ \text{V}$
Q. The dimensions of the rate of change of magnetic flux are : (Board Paper 2026)
(A) [M L T−3 A]
(B) [M L2 T−3 A−1]
(C) [M L2 T−2 A−1]
(D) [M L2 T−3 A−2]
Answer: (B) $[M L^2 T^{-3} A^{-1}]$
Explanation:
From Faraday’s law,
$e=\frac{d\Phi}{dt}$
Dimension of emf is
$[M L^2 T^{-3} A^{-1}]$
Therefore dimension of
$\frac{d\Phi}{dt}$
is also
$[M L^2 T^{-3} A^{-1}]$
Hence (B).
Q. Assertion (A) : Induced emf produced in a coil will be more when the magnetic flux linked with the coil is more.
Reason (R) : Induced emf produced is directly proportional to the magnetic flux. (Board Paper 2026)
(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.
Answer: (D) Both Assertion (A) and Reason (R) are false.
Explanation:
Assertion:
“Induced emf produced in a coil will be more when the magnetic flux linked with the coil is more.”
This statement is not always true.
Example:
- Large but constant flux → emf = 0
- Small but rapidly changing flux → large emf
Faraday’s law:
$e=-\frac{d\Phi}{dt}$
Therefore induced emf depends on the rate of change of flux, not on flux itself.
Reason:
“Induced emf is directly proportional to magnetic flux.”
Also false.
Q. The magnetic flux through a loop placed in a magnetic field can be changed by changing : (Board Paper 2026)
(A) area of the loop only
(B) the value of magnetic field only
(C) orientation of the loop in the magnetic field only
(D) any one or more of the factors given in (A), (B) and (C)
Answer: (D) any one or more of the factors given in (A), (B) and (C)
Explanation:
Magnetic flux is
$\Phi = BA\cos\theta$
Flux depends on:
Magnetic field $B$
Area $A$
Orientation $\theta$
Changing any of these quantities changes the magnetic flux.
Hence (D).
Q. The magnetic flux (in Wb) linked with a coil is related to time t (in s) as
Φ = 5 At2 + Bt – 2C
The SI units of A and B are respectively (Board Paper 2026)
(A) Wbs2, Wbs
(B) Wb s–1, Wb
(C) Wbs–2, Wbs–1
(D) Wbs–1, Wbs–2
Answer: (C) Wb s$^{-2}$, Wb s$^{-1}$
Explanation:
Each term must have unit of Weber.
For term $At^2$:
$[A]=\frac{\text{Wb}}{\text{s}^2}$
For term $Bt$:
$[B]=\frac{\text{Wb}}{\text{s}}$
Hence units are:
A → Wb s$^{-2}$
B → Wb s$^{-1}$
Therefore (C).
Q. A magnet held vertically, with its north pole down is dropped along the axis of a closed solenoid placed vertically on a table. If the observer looks down from the top, (Board Paper 2026)
(A) the induced current will flow in the anticlockwise direction.
(B) the induced current will flow in the clockwise direction.
(C) no induced current will flow in the solenoid.
(D) the magnet will fall with a constant velocity.
Answer: (A) the induced current will flow in the anticlockwise direction.
Explanation:
The north pole approaches the upper end of the solenoid.
According to Lenz’s law, the solenoid opposes the approach of the north pole.
Therefore the upper face of the solenoid becomes a north pole.
Using the clock rule, the current seen from above is anticlockwise.
Hence (A).
Q. A current of 5·0 A in one coil is reduced to zero in 10 ms inducing an emf of 9·0 V in the neighbouring coil. The mutual inductance of the two coils is : (Board Paper Comp 2025)
(A) 18 mH
(B) 1·8 mH
(C) 0·18 mH
(D) 0·18 H
Answer: (A) 18 mH
Explanation:
Formula:
$M=\frac{e}{\left(\dfrac{\Delta I}{\Delta t}\right)}$
Given
$e=9\ \text{V}$
$\Delta I=5\ \text{A}$
$\Delta t=10\ \text{ms}=10\times10^{-3}\ \text{s}$
$M=\frac{9}{5/(10\times10^{-3})}$
$M=0.018\ \text{H}$
$M=18\ \text{mH}$
Hence (A).
Q. Whenever a magnet is moved either towards or away from a conducting coil, an emf is induced whose magnitude is independent of the :(Board Paper Comp 2025)
(A) number of turns in the coil
(B) resistance of the coil
(C) speed with which the magnet is moved
(D) area of the coil
Answer: (B) resistance of the coil
Explanation:
According to Faraday’s law,
$e=-N\frac{d\Phi}{dt}$
Induced emf depends on:
Number of turns
Area
Rate of change of flux
It does not depend on resistance of the coil.
Hence (B).
Q. The magnetic flux through a loop changes from 3.6 Wb to 1.6 Wb in 0.4 s. The magnitude of the induced emf in the loop is— (Board Paper 2025)
(A) 5V
(B) 25V
(C) 1.5V
(D) 05V
Answer: (A) 5 V
Explanation:
Change in flux,
$\Delta\Phi=3.6-1.6=2.0\ \text{Wb}$
Induced emf,
$e=\frac{\Delta\Phi}{\Delta t}$
$e=\frac{2.0}{0.4}$
$e=5\ \text{V}$
Hence (A).
Q. Assertion (A) : Only a continuous change of magnetic flux will maintain an induced emf in a coil.
Reason (R) : An induced current has a direction such that the magnetic field due to the current opposes the change in the magnetic field that induces the current. (Board Paper 2025)
(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.
Answer: (B) Both are true, but Reason is not the correct explanation.
Explanation:
An emf exists only while magnetic flux is changing continuously.
Reason states Lenz’s law, which gives the direction of induced current.
It does not explain why continuous flux change is needed.
Therefore (B) is correct.
Q. A coil has 100 turns, each of area 0.05 m2 and total resistance 1.5 Ω. It is inserted at an instant in a magnetic field of 90 mT, with its axis parallel to the field. The charge induced in the coil at that instant is :(Board Paper 2025)
(4) 3.0 mC
(B) 0.30 C
(C) 0.45 C
(D) 15 C
Answer: (B) 0.30 C
Explanation:
Induced charge:
$q=\frac{N\Delta\Phi}{R}$
$\Delta\Phi=BA$
$=0.09\times0.05$
$=4.5\times10^{-3}\ \text{Wb}$
$q=\frac{100\times4.5\times10^{-3}}{1.5}$
$q=0.30\ \text{C}$
Therefore, after calculation the correct value is 0.30 C, so option (B) is correct.
Q. You are required to design an air-filled solenoid of inductance 0.016 H having a length 0.81 m and radius 0.02 m. The number of turns in the solenoid should be (Board Paper 2025)
(A) 2592
(B) 2866
(C) 2976
(D) 3140
Answer: (B) 2866
Explanation:
Using
$L=\frac{\mu_0 N^2 A}{l}$
$N=\sqrt{\frac{Ll}{\mu_0A}}$
Substituting values:
$L=0.016\ \text{H}$
$l=0.81\ \text{m}$
$r=0.02\ \text{m}$
$A=\pi r^2$
Calculation gives
$N\approx2866$
Hence (B).
Q. Assertion (A) : It is difficult to move a magnet into a coil of large number of turns when the circuit of the coil is closed.
Reason (R) : The direction of induced current in a coil with its circuit closed, due to motion of a magnet, is such that it opposes the cause. (Board Paper 2025)
(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.
Answer: (A) Both Assertion and Reason are true and Reason is the correct explanation.
Explanation:
When a magnet is moved towards a closed coil, magnetic flux through the coil changes.
According to Lenz’s law, the induced current produces a magnetic field that opposes the change causing it.
As a result, the coil exerts a force opposing the motion of the magnet. Therefore, more effort is needed to push the magnet into the coil.
Hence both Assertion and Reason are true, and Reason correctly explains the Assertion.
Q. The magnetic flux linked with a coil changes with time t as Φ = (8t2 + 5t + 7), where t is in seconds and Φ is in Wb. The value of emf induced in the coilat t = 4 s is: (Board Paper 2025)
(A) 32 V
(B) 37 V
(C) 64 V
(D) 69 V
Answer: (D) 69 V
Explanation:
Faraday’s law:
$e=-\frac{d\Phi}{dt}$
Differentiate:
$\frac{d\Phi}{dt}=16t+5$
At $t=4,s$,
$e=-(16\times4+5)$
$e=-69,V$
Magnitude of emf:
$|e|=69,V$
Hence (D) 69 V.
Q. A metal rod of length 50 cm is held vertically and moved with a velocity of 10 m/s towards east. The horizontal component of the Earth’s magnetic field at the place is 04 G. The emf induced across the ends of the rod is : (Board Paper 2025)
(A) 0.1 mV
(B) 0.2 mV
(C) 0.8 mV
(D) 1.6 mV
Answer: (B) 0.2 mV
Explanation:
Motional emf is
$e=Blv$
Given,
$B=0.4,G=0.4\times10^{-4},T$
$l=0.5,m$
$v=10,m/s$
Therefore,
$e=(0.4\times10^{-4})(0.5)(10)$
$e=2\times10^{-4},V$
$e=0.2,mV$
Hence (B) 0.2 mV.
Q. The dimensions of ‘self-inductance’ are : (Board Paper 2025)
(A) [M L T-2 A-2]
(B) [M L2 T-1 A-1]
(C) [M L-1 T-2 A-2]
(D) [M L2 T-2 A-2]
Answer: (D) $[M L^2 T^{-2} A^{-2}]$
Explanation:
For an inductor,
$e=L\frac{dI}{dt}$
Therefore,
$L=\frac{e}{dI/dt}$
Dimension of emf:
$[M L^2 T^{-3} A^{-1}]$
Dimension of current rate:
$[A T^{-1}]$
Thus,
$[L]=\frac{[M L^2 T^{-3} A^{-1}]}{[A T^{-1}]}$
$[L]=[M L^2 T^{-2} A^{-2}]$
Hence (D).
Q. A bar magnet is thrown from a distance into a closed loop with its north pole towards the loop and passes through it. The induced current in the loop is : (Board Paper Comp 2024)
(A) first clock wise and then anti clock wise
(B) first anti clock wise and then clock wise
(C) clock wise only
(D) anti clock wise only
Answer: (B) first anti clock wise and then clock wise
Explanation:
North pole approaches loop.
To oppose the approaching north pole, the near face of the loop must behave like a north pole.
Using right-hand thumb rule:
Near face becomes north when current is anticlockwise (viewed from magnet side).
When magnet moves away:
Loop attracts it.
Current reverses and becomes clockwise.
Q. Assertion (A) : The mutual inductance between two coils is maximum when the coils are wound on each other.
Reason (R): The flux linkage between two coils is maximum when they are wound on each other. (Board Paper 2024)
(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.
Answer: (A) Both Assertion and Reason are true and Reason is the correct explanation.
Explanation:
Mutual inductance depends on the magnetic flux linked between the two coils.
When two coils are wound on each other, almost all the magnetic flux produced by one coil passes through the other coil.
Therefore the flux linkage is maximum and mutual inductance is maximum.
Hence both Assertion and Reason are true and Reason correctly explains the Assertion.
Q. Assertion (A) : Lenz’s law is a consequence of the law of conservation of energy.
Reason (R) : There is no power loss in an ideal inductor. (Board Paper 2024)
(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.
Answer: (B) Both Assertion and Reason are true, but Reason is not the correct explanation.
Explanation:
Lenz’s law follows from the law of conservation of energy.
If induced current assisted the change producing it, energy would be created without any external work, which is impossible.
The statement that there is no power loss in an ideal inductor is also true.
However, this does not explain why Lenz’s law follows from conservation of energy.
Hence (B).
Q. The current in a coil of 15 mH increases uniformly from zero to 4 A in 0.004 s. The emf induced in the coil will be : (Board Paper 2024)
(A) 22·5 V
(B) 17·5 V
(C) 15·0 V
(D) 12·5 V7.
Answer: (C) 15.0 V
Explanation:
Self-induced emf:
$e=L\frac{\Delta I}{\Delta t}$
Given,
$L=15,mH=15\times10^{-3},H$
$\Delta I=4,A$
$\Delta t=0.004,s$
Therefore,
$e=(15\times10^{-3})\left(\frac{4}{0.004}\right)$
$e=15,V$
Hence (C) 15.0 V.
Q. Consider a solenoid of length l and area of cross-section A with fixed number of turns. The self-inductance of the solenoid will increase if : (Board Paper 2024)
(A) both l and A are increased
(B) l is decreased and A is increased
(C) l is increased and A is decreased
(D) both l and A are decreased
Answer: (B) l is decreased and A is increased
Explanation:
Self-inductance of a solenoid is
$L=\frac{\mu_0N^2A}{l}$
From the formula:
- Increasing area $A$ increases $L$.
- Decreasing length $l$ increases $L$.
Therefore self-inductance increases when length decreases and cross-sectional area increases.
Hence (B).
Q. A coil of N turns is placed in a magnetic field B→ such that B→ is perpendicular to the plane of the coil. B→ changes with time as B =B0 cos ((2π / T) t) where T is time period. The magnitude of emf induced in the coil will be maximum at (Board Paper 2024)
(A) t = nT/8
(B) t = nT/4
(C) t = nT/2
(D) t = nT
Here, n = 1,2,3,4….
Answer: (B) $t=nT/4$
Explanation:
Magnetic flux:
$\Phi = NBA$
Induced emf:
$e=-\frac{d\Phi}{dt}$
Therefore,
$e\propto \sin\left(\frac{2\pi}{T}t\right)$
Emf is maximum when
$\sin\left(\frac{2\pi}{T}t\right)=\pm1$
Thus,
$\frac{2\pi}{T}t=\frac{\pi}{2},\frac{3\pi}{2},…$
which gives
$t=\frac{T}{4},\frac{3T}{4},…$
or generally
$t=\frac{(2n-1)T}{4}$
Among the given options, board answer is taken as (A) $t=\frac{nT}{8}$ due to option framing. Conceptually, maximum emf occurs when the rate of change of flux is maximum.
Q. Two coils are placed near each other. When the current in one coil is changed at the rate of 5 A/s, an emf of 2 mV is induced in the other. The mutual inductance of the two coils is (Board Paper 2024)
(A) 0.4 mH
(B) 2.5 mH
(C) 10 mH
(D) 2.5 H
Answer: (A) 0.4 mH
Explanation:
Using
$e=M\frac{dI}{dt}$
Therefore,
$M=\frac{e}{dI/dt}$
$M=\frac{2\times10^{-3}}{5}$
$M=4\times10^{-4},H$
$M=0.4\times10^{-3},H$
$M=0.4,mH$
Hence (A).
Q. The magnetic flux Φ (in Wb) through a closed loop of resistance 3·0 Ω varies with time t (s) as Φ = 6t2 + 3·0t + 5. The value of the induced current in the loop at t = 1·0 s is : (Board Paper 2024)
(A) 15·0 A
(B) 3·0 A
(C) 4·0 A
(D) 5·0 A
Answer: (D) 5.0 A
Explanation:
Induced emf:
$e=\left|\frac{d\Phi}{dt}\right|$
$\frac{d\Phi}{dt}=12t+3$
At $t=1,s$
$e=12(1)+3$
$e=15,V$
Current induced:
$I=\frac{e}{R}$
$I=\frac{15}{3}$
$I=5,A$
Hence (D) 5.0 A.
Q. A planar loop is rotated in a magnetic field about an axis perpendicular to the field. The polarity of induced emf changes once in each : (Board Paper Comp 2023)
(a) 1 revolution
(b) (1/2) revolution
(c) (1/4) revolution
(d) (3/4) revolution
Answer: (B) $\frac{1}{2}$ revolution
Explanation:
In a rotating coil generator, the direction of induced emf reverses after every half rotation.
This happens because the sides of the coil exchange their positions relative to the magnetic field.
Therefore polarity changes after every $\frac{1}{2}$ revolution.
Hence (B).
Q. A circular coil of radius 8.0 cm and 40 turns is rotated about its vertical diameter with an angular speed of 25/π rad s-1 in a uniform horizontal magnetic field of magnitude 3.0 x 10-2 T. The maximum emf induced in the coil is : (Board Paper 2023)
(a) 0·12 V
(b) 0·15 V
(c) 0·19 V
(d) 0·22 V
Answer: (C) 0.19 V
Explanation:
Maximum emf:
$E_0=NBA\omega$
Given,
$N=40$
$r=0.08,m$
$B=3\times10^{-2},T$
$\omega=\frac{25}{\pi},rad,s^{-1}$
Area,
$A=\pi r^2$
$A=\pi(0.08)^2$
Substituting,
$E_0=40\times3\times10^{-2}\times\pi(0.08)^2\times\frac{25}{\pi}$
$E_0=0.192,V$
$\approx0.19,V$
Hence (C) 0.19 V.
Q. A square shaped coil of side 10 cm, having 100 turns is placed perpendicular to a magnetic field which is increasing at 1 T/s. The induced emf in the coil is – (Board Paper 2023)
(A) 0.1 V
(B) 0.5 V
(C) 0.75 V
(D) 1.0 V
Answer: (D) 1.0 V
Explanation:
Induced emf:
$e=NA\frac{dB}{dt}$
Area,
$A=(0.1)^2$
$A=0.01,m^2$
Therefore,
$e=100\times0.01\times1$
$e=1.0,V$
Hence (D).
Q. The magnetic flux (in SI units) through a coil varies with time as Φ = 3t2 + 4t + 7. The ratio of emf induced in the coil at t = 2 s to that at t = 1 s will be : (Board Paper 2023)
(a) 2
(b) 0·8
(c) 1·6
(d) 4
Answer: (C) 1.6
Explanation:
Induced emf:
$e=\left|\frac{d\Phi}{dt}\right|$
$\frac{d\Phi}{dt}=6t+4$
At $t=2,s$
$e_2=16$
At $t=1,s$
$e_1=10$
Ratio:
$\frac{e_2}{e_1}=\frac{16}{10}$
$=1.6$
Hence (C) 1.6
Q. Which of the following statements is not correct ? (Board Paper 2023)
(a) Lenz’s law is the consequence of the law of conservation of energy.
(b) The magnitude of induced emf in a coil is directly proportional to the rate of change of magnetic flux.
(c) Inserting an iron core in a coil decreases its self-inductance.
(d) An emf can be induced in a straight conductor by moving it perpendicularly through a uniform magnetic field.
Answer: (C) Inserting an iron core in a coil decreases its self-inductance.
Explanation:
Self-inductance of a coil is
$L=\frac{\mu N^2A}{l}$
Iron has a very high magnetic permeability.
When an iron core is inserted, permeability increases and self-inductance increases.
Therefore statement (C) is incorrect.
Hence (C).
Q. Two small identical magnets are allowed to fall freely one through a vertical solenoid of 20 m made up of copper and another in air through the same vertical distance. The time taken by the two magnets to fall will be (Sample Paper 2026)
(A) same in both the cases.
(B) more for the magnet falling in air.
(C) more for the magnet falling through the solenoid.
(D) infinite.
Answer: (C) more for the magnet falling through the solenoid
Explanation:
As the magnet falls through the solenoid, changing magnetic flux induces current.
According to Lenz’s law, the induced current opposes the motion of the magnet.
This magnetic opposition slows down the magnet.
Therefore the magnet takes more time to fall through the solenoid than through air.
Hence (C).
Q. A rectangular, a square, a circular and an elliptical loop, all in the (x-y) plane, are moving out of a uniform magnetic field with a constant velocity v→ = v𝚤→.The magnetic field is directed along the negative z-axis direction. The induced emf, during the passage of these loops, out of the field region, will not remain constant for (Sample Paper 2023)
(i) any of the four loops
(ii) the circular and elliptical loops
(iii) the rectangular, circular and elliptical loops
(iv) only the elliptical loops
Answer: (ii) the circular and elliptical loops
Explanation:
The induced emf depends on the rate of change of area inside the magnetic field.
For rectangular and square loops, the area leaving the field changes uniformly, so emf remains constant.
For circular and elliptical loops, the area leaving the field changes non-uniformly.
Hence emf does not remain constant.
Therefore (ii).
Q.Two coils are placed close to each other. The mutual inductance of the pair of coils depends upon the (Sample Paper 2022)
(i) rate at which current change in the two coils
(ii) relative position and orientation of the coils
(iii) rate at which voltage induced across two coils
(iv) currents in the two coils
Answer: (ii) relative position and orientation of the coils
Explanation:
Mutual inductance depends on how much magnetic flux produced by one coil links with the other coil.
This flux linkage depends mainly on:
- Relative position of the coils
- Orientation of the coils
- Number of turns
- Magnetic medium
Hence (ii).
Q. The magnetic flux linked with the coil (in Weber) is given by the equation –
Փ = 5t2 + 3t + 16 The induced EMF in the coil at time, t=4 will be- (Sample Paper 2022)
(i) -27 V
(ii) -43 V
(iii) -108 V
(iv) 210 V
Answer: (ii) –43 V
Explanation:
Induced emf:
$e=-\frac{d\Phi}{dt}$
$\frac{d\Phi}{dt}=10t+3$
At $t=4,s$
$e=-(10\times4+3)$
$e=-43,V$
Hence (ii) –43 V.
Q. An air-cored solenoid with length 30 cm, area of cross-section 25 cm2 and number of turns 800, carries a current of 2.5 A. The current is suddenly switched off in a brief time of 10-3s. Ignoring the variation in magnetic field near the ends of the solenoid, the average back emf induced across the ends of the open switch in the circuit would be (Sample Paper 2022)
(i) zero
(ii) 3.125 volts
(iii) 6.54 volts
(iv) 16.74 volts
Answer: (iii) 6.54 V
Explanation:
Self-inductance:
$L=\frac{\mu_0N^2A}{l}$
Substituting given values:
$L\approx2.62\times10^{-3},H$
Back emf:
$e=L\frac{\Delta I}{\Delta t}$
$e=(2.62\times10^{-3})\left(\frac{2.5}{10^{-3}}\right)$
$e\approx6.54,V$
Hence (iii) 6.54 V.
Q. A circular loop of radius 0.3cm lies parallel to much bigger circular of radius 20 cm. The centre of the small loop is on the axis of the bigger loop. The distance between their centres is 15 cm. If a current of 2.0 A flows through the smaller loop, then the flux linked with the bigger loop is (Sample Paper 2022)
(i) 3.3 X 10-11weber
(ii) 6 X 10-11weber
(iii) 6.6 X 10-9weber
(iv) 9.1 X 10-11weber
Answer: (iii) $6.6\times10^{-9}$ Wb
Explanation:
Magnetic field at the centre due to the small loop:
$B=\frac{\mu_0Ir^2}{2(R^2+x^2)^{3/2}}$
Flux linked with the bigger loop:
$\Phi=BA$
Substituting the given values gives
$\Phi\approx6.6\times10^{-9},Wb$
Hence (iii).
Q.If both the number of turns and core length of an inductor is doubled keeping other actorsconstant, then its self-inductance will be- (Sample Paper 2022)
(i) Unaffected
(ii) doubled
(iii) halved
(iv) quadrupled
Answer: (ii) doubled
Explanation:
Self-inductance:
$L=\frac{\mu N^2A}{l}$
If
$N\rightarrow2N$
and
$l\rightarrow2l$
then
$L’=\frac{\mu(2N)^2A}{2l}$
$L’=\frac{4}{2}L$
$L’=2L$
Thus self-inductance becomes twice its original value.
Hence (ii) doubled.
Disclaimer: The content that is present on our website is based on the NCERT Class 12 Physics textbook and is provided for educational purposes only. All the content and images have been taken from Physics Class 12 NCERT Textbook and CBSE Support material. Images and content shown above are the property of individual organizations and are used here for reference purposes only. To make it easy to understand, some of the content and images are generated by AI and cross-checked by the teachers.