Class 1 Class 2 Class 3 Class 4 Class 5 Class 6 Class 7 Class 8

Alternating Current Class 12 Board Paper MCQ

← Back to Class 12 Physics

Practise important Alternating Current Class 12 Board Paper MCQs with answers based on previous CBSE board papers, compartment examinations, and sample papers. These questions will help you revise important concepts and prepare effectively for your Class 12 Physics board examination.

Alternating Current Class 12 Board Paper MCQ

Alternating Current Class 12 Board Paper MCQ

Q. 110 kW electric power is supplied to the primary coil of an ideal transformer. If the output voltage is 22 kV, the output current will be: (Board Paper Comp 2026)
(A) 50 A
(B) 25 A
(C) 5 A
(D) 0·5 A

Answer: (C) 5 A

Explanation:

For an ideal transformer,

$P_p = P_s$

Given,

$P_s = 110 \times 10^3 , W$

$V_s = 22 \times 10^3 , V$

Using,

$P_s = V_s I_s$

$110 \times 10^3 = 22 \times 10^3 \times I_s$

$I_s = \frac{110 \times 10^3}{22 \times 10^3}$

$I_s = 5,A$

Therefore, the output current is 5 A.

Q. In a series LCR circuit connected to an AC source of voltage $V$ and frequency $\omega$, the power loss at resonance is: (Board Paper Comp 2026)
(A) $I^2\omega L$
(B) $\dfrac{V^2}{\omega C}$
(C) $\dfrac{V^2}{R}$
(D) $\dfrac{V^2}{\left(\omega L – \dfrac{1}{\omega C}\right)}$

Answer: (C) $\dfrac{V^2}{R}$

Explanation:

At resonance,

$X_L = X_C$

Therefore, impedance becomes

$Z = R$

Power consumed is

$P = \frac{V^2}{R}$

Hence, power loss at resonance is $\dfrac{V^2}{R}$.

Q. Assertion (A) : In a series LCR circuit at resonance, the impedance is equal to ohmic resistance (R) in the circuit.
Reason (R) : At resonance, the capacitive reactance is not equal to the inductive reactance. (Board Paper 2026)

(A) Both Assertion (A) and Reason (R) are true and Reason (R)is the correct explanation of Assertion (A).
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.

Answer: (C) Assertion is true, but Reason is false.

Explanation:

At resonance,

$X_L = X_C$

Therefore,

$Z = \sqrt{R^2+(X_L-X_C)^2}$

$Z = \sqrt{R^2+0}$

$Z=R$

Hence Assertion is true.

The Reason is false because at resonance inductive reactance and capacitive reactance are equal, not unequal.

Q. An ac voltage is given as v = 14 sin (314t)V. The average and the effective value of the voltage (in V) over a cycle are respectively: (Board Paper 2026)
(A) 14 and 7
(B) 10 and 14
(C) 0 and 10
(D) 10 and 0

Answer: (C) 0 and 10

Explanation:

Peak voltage,

$V_0 = 14,V$

Average value over one complete cycle of AC is

$V_{avg}=0$

RMS value is

$V_{rms}=\frac{V_0}{\sqrt2}$

$V_{rms}=\frac{14}{\sqrt2}$

$V_{rms}\approx 10,V$

Therefore, average value = 0 V and effective value = 10 V.

Q. In a series LCR circuit, the voltage across the resistor, capacitor and inductor is 10 V each. If the capacitor is short circuited, the voltage across the inductor will be (Board Paper 2026)
(A) 10 V
(B) 5√2 V
(C) 5/√2 V
(D) 10√2 V

Answer: (B) $5\sqrt2$ V

Explanation:

Initially,

$V_R = V_L = V_C = 10,V$

Since

$V_L = V_C$

the circuit is at resonance.

So,

$X_L = X_C = R$

After short-circuiting the capacitor, only R and L remain.

Thus

$Z=\sqrt{R^2+X_L^2}$

$Z=\sqrt{R^2+R^2}$

$Z=R\sqrt2$

Current becomes

$I’=\frac{V}{R\sqrt2}$

Voltage across inductor,

$V’_L=I’X_L$

$V’_L=\frac{V}{R\sqrt2}\times R$

$V’_L=\frac{V}{\sqrt2}$

Since source voltage at resonance was

$V=10,V$

$V’_L=\frac{10}{\sqrt2}=5\sqrt2,V$

Q. Which of the following statements is not true for electric energy in ac form compared to that in dc form?(Board Paper 2026)
(A) Production of ac is economical.
(B) ac can be easily and efficiently converted from one voltage to the other.
(C) ac can be transmitted economically over long distances.
(D) ac is less dangerous.

Answer: (D) ac is less dangerous.

Explanation:

AC can be stepped up or stepped down easily and transmitted economically over long distances. However, AC is generally more dangerous than DC of the same voltage because its magnitude changes continuously and can cause severe electric shocks.

Q. Which of the following statements about transformers is not correct ? (Board Paper Comp 2025)
(A) For ideal transformers, the output power is equal to the input power.
(B) A transformer can work for both alternating and direct voltages.
(C) For a step-up transformer, the voltage across the secondary coil is higher but the current in it is lower.
(D) For an ideal transformer, the magnetic flux linked with the secondary is equal to that linked with the primary.

Answer: (B) A transformer can work for both alternating and direct voltages.

Explanation:

A transformer works on the principle of mutual induction which requires changing magnetic flux.

DC produces constant flux and hence a transformer does not work with DC.

Q. Which of the following will not increase the output voltage in a generator ?(Board Paper Comp 2025)
(A) Rotating the coil rapidly
(B) Changing the material of the coil
(C) Increasing the area of coil
(D) Increasing the magnetic field through the coil

Answer: (B) Changing the material of the coil

Explanation:

Generator emf depends on:

  • Magnetic field strength
  • Number of turns
  • Area of coil
  • Speed of rotation

Changing the material of the coil does not affect induced emf significantly.

Q. Assertion (A) : The reactance of an inductor decreases with the increase in the frequency of alternating voltage applied.
Reason (R) : The reactance of an inductor XL = 1/wL.(Board Paper Comp 2025)

(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.

Answer: (D) Both Assertion and Reason are false.

Explanation:

For an inductor,

$X_L=\omega L$

As frequency increases, inductive reactance also increases.

Therefore Assertion is false.

The given formula is also wrong because

$X_L=\omega L$

Hence Reason is false.

Q. The average value of voltage of 220 V ac mains during its positive half cycle will be :(Board Paper Comp 2025)
(A) 156 V
(B) 198 V
(C) 220 V
(D) zero

Answer: (B) 198 V

Explanation:

Given RMS value,

$V_{rms}=220,V$

Peak value,

$V_0=\sqrt2\times220$

$V_0\approx311,V$

Average voltage during positive half-cycle,

$V_{avg}=\frac{2V_0}{\pi}$

$V_{avg}=\frac{2\times311}{\pi}$

$V_{avg}\approx198,V$

Q. Which of the following assumptions has been used to obtain the relation vs/vp = Ns/Np for a transformer ?(Board Paper Comp 2025)
(A) The resistance of the primary coil is large.
(B) The same flux links both the primary and the secondary coils.
(C) The resistance of secondary coil is large.
(D) The transformer is 100% efficient.

Answer: (B) The same flux links both the primary and the secondary coils.

Explanation:

In an ideal transformer, the entire magnetic flux produced in the primary coil links the secondary coil.

Therefore,

$\frac{V_s}{V_p}=\frac{N_s}{N_p}$

Q. A step up transformer — (Board Paper 2025)
(A) decreases the current to transmit power over short distances with minimum loss.
(B) increases the current to transmit power over short distances with minimum loss.
(C) increases the voltage to transmit power over short distances with minimum loss.
(D) increases the voltage to transmit power over long distances with minimum loss.

Answer: (D) increases the voltage to transmit power over long distances with minimum loss.

Explanation:

For fixed power,

$P=VI$

When voltage is increased, current decreases.

Power loss in transmission line is

$P_{loss}=I^2R$

Smaller current means smaller power loss.

Hence high voltage is used for long-distance transmission.

Q. Assertion (A) : At resonance the impedance of a series LCR circuit is Z = R.
Reason (R) : Z = √R2 + (Xc —XL)2 and at resonance the inductive reactance (XL) is equal to the capacitive reactance (Xc). (Board Paper 2025)

(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.

Answer: (A) Both Assertion and Reason are true and Reason is the correct explanation.

Explanation:

At resonance,

$X_L=X_C$

Therefore,

$Z=\sqrt{R^2+(X_C-X_L)^2}$

$Z=\sqrt{R^2}$

$Z=R$

Thus Reason correctly explains the Assertion.

Q. A voltage v =vo, sin ot applied to a circuit drives a current i = io sin (wt + φ)
in the circuit. The average power consumed in the circuit over a cycle is (Board Paper 2025)

(A) Zero
(B) io vo cos φ
(C) io vo/2
(D) io vo/2 cos φ

Answer: (D) $\dfrac{i_0v_0}{2}\cos\phi$

Explanation:

Average AC power is

$P_{avg}=V_{rms}I_{rms}\cos\phi$

Since

$V_{rms}=\frac{v_0}{\sqrt2}$

and

$I_{rms}=\frac{i_0}{\sqrt2}$

Therefore,

$P_{avg}=\frac{v_0i_0}{2}\cos\phi$

Q. A transformer is connected to a 200 V ac source. The transformer supplies 3000 V to a device. If the number of turns in the primary coil is 450, then the number of turns in its secondary coil is — (Board Paper 2025)
(A) 30
(B) 450
(C) 4500
(D) 6750

Answer: (D) 6750

Explanation:

Using

$\frac{V_s}{V_p}=\frac{N_s}{N_p}$

$\frac{3000}{200}=\frac{N_s}{450}$

$15=\frac{N_s}{450}$

$N_s=6750$

Q. Assertion (A) : In an ideal step-down transformer, the electrical energy is not lost.
Reason (R) : In a step-down transformer, voltage decreases but the current increases. (Board Paper 2025)

(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.

Answer: (B) Both are true, but Reason is not the correct explanation.

Explanation:

An ideal transformer has

$P_p=P_s$

Therefore no energy is lost.

The reason states the property of a step-down transformer, but it does not explain why there is no energy loss.

Q. An ammeter connected in series in an ac circuit reads 10 A. The maximum value of current at any instant in the circuit is : (Board Paper 2025)
(A) 10√2 A
(B) 10/√2 A
(C) 10/π A
(D) 10/√2π A

Answer: (A) $10\sqrt2,A$

Explanation:

An AC ammeter reads RMS current.

Given,

$I_{rms}=10,A$

Using,

$I_0=\sqrt2,I_{rms}$

$I_0=10\sqrt2,A$

Q. Assertion (A) : A series LCR circuit behaves as a pure resistive circuit at resonance.
Reason (R) : At resonance XL = XC gives ω = 1/√LC. (Board Paper 2025)

(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.

Answer: (A) Both Assertion and Reason are true and Reason is the correct explanation.

Explanation:

At resonance,

$X_L = X_C$

Therefore net reactance becomes zero.

$X = X_L – X_C = 0$

Hence,

$Z = R$

The circuit behaves like a pure resistor. The condition

$X_L=X_C$

gives

$\omega L=\dfrac{1}{\omega C}$

$\omega=\dfrac{1}{\sqrt{LC}}$

Thus the Reason correctly explains the Assertion.

Q. An ac source is connected to a resistor and an inductor in series. The voltage across the resistor and inductor are 8 V and 6 V respectively. The voltage of the source is: (Board Paper 2025)
(A) 10 V
(B) 12 V
(C) 14 V
(D) 16 V

Answer: (A) 10 V

Explanation:

In an RL circuit, voltages across R and L are perpendicular in phase.

Therefore source voltage is

$V=\sqrt{V_R^2+V_L^2}$

$V=\sqrt{8^2+6^2}$

$V=\sqrt{64+36}$

$V=\sqrt{100}$

$V=10,V$

Q. An alternating current is given by I = Io cos (100π)t. The least time the current takes to decrease from its maximum value to zero will be : (Board Paper 2025)
(A) (1/200)s
(B) (1/150)s
(C) (1/100)s
(D) (1/50)s

Answer: (A) $\dfrac{1}{200},s$

Explanation:

Given,

$\omega = 100\pi$

Time period,

$T=\dfrac{2\pi}{\omega}$

$T=\dfrac{2\pi}{100\pi}$

$T=\dfrac{1}{50},s$

Current changes from maximum value to zero in one-fourth cycle.

$t=\dfrac{T}{4}$

$t=\dfrac{1}{50\times4}$

$t=\dfrac{1}{200},s$

Q. A capacitor and an inductor are connected in series across an ac source of voltage of variable frequency. The frequency is increased continuously. The nature of the circuit before and after the resonance will be : (Board Paper 2025)
(A) inductive only
(B) capacitive only
(C) capacitive and inductive respectively
(D) inductive and capacitive respectively

Answer: (C) capacitive and inductive respectively

Explanation:

Inductive reactance:

$X_L=\omega L$

Capacitive reactance:

$X_C=\dfrac{1}{\omega C}$

Before resonance,

$X_C>X_L$

Circuit behaves as a capacitive circuit.

After resonance,

$X_L>X_C$

Circuit behaves as an inductive circuit.

Q. Assertion (4) : At a very high frequency, a capacitor can behave as a conductor.
Reason (R) : The capacitance of a capacitor depends only on its geometrical configuration and nature of dielectric used. (Board Paper Comp 2024)

(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.

Answer: (B) Both Assertion and Reason are true, but Reason is not the correct explanation.

Explanation:

Capacitive reactance is

$X_C=\dfrac{1}{\omega C}$

At very high frequency, $X_C$ becomes very small.

Therefore the capacitor offers very little opposition and behaves almost like a conductor.

The Reason is true because capacitance depends on geometry and dielectric, but it does not explain the behavior at high frequency.

Q. A coil of resistance 20 Ω and self-inductance 10 mH is connected to an ac source of frequency 1000/π Hz. The phase difference between current in the circuit and the source voltage is : (Board Paper Comp 2024)
(A) 30°
(B) 60°
(C) 75°
(D) 45°

Answer: (D) 45°

Explanation:

Given,

$R=20,\Omega$

$L=10,mH=10\times10^{-3},H$

$f=\dfrac{1000}{\pi},Hz$

Angular frequency,

$\omega =2\pi f$

$\omega =2\pi \times \dfrac{1000}{\pi}$

$\omega =2000,rad,s^{-1}$

Inductive reactance,

$X_L=\omega L$

$X_L=2000\times10\times10^{-3}$

$X_L=20,\Omega$

For RL circuit,

$\tan\phi=\dfrac{X_L}{R}$

$\tan\phi=\dfrac{20}{20}=1$

$\phi=45^\circ$

Q. A bulb is rated (100 W, 110 V). It is operated by current of 1.0 A supplied by a step down transformer. If the input voltage and efficiency of the transformer are 220 V and 0.9 respectively, the input current drawn from the mains is : (Board Paper Comp 2024)
(A) 1/2 A
(B) 3/8 A
(C) 5/9 A
(D) 4/7 A

Answer: (A) $\dfrac{1}{2}$ A

Explanation:

Output power of bulb,

$P_{out}=100,W$

Efficiency:

$\eta=\frac{P_{out}}{P_{in}}$

$P_{in}=\frac{100}{0.9}$

$P_{in}=111.1,W$

Input current:

$I_{in}=\frac{111.1}{220}$

$I_{in}=0.505,A$

$\dfrac{1}{2}$ A

Q. The reactance of a capacitor of capacitance C connected to an ac source of frequency o is X’. If the capacitance of the capacitor is doubled and the frequency of the source is tripled, the reactance will become : (Board Paper 2024)
(A) X/6
(B) 6X
(C) 2/3 X
(D) 3/2 X

Answer: (A) $\dfrac{X}{6}$

Explanation:

Capacitive reactance,

$X_C=\dfrac{1}{\omega C}$

New capacitance,

$C’=2C$

New frequency,

$\omega’=3\omega$

Therefore,

$X_C’=\dfrac{1}{(3\omega)(2C)}$

$X_C’=\dfrac{1}{6\omega C}$

$X_C’=\dfrac{X}{6}$

Q. Which of the following quantity/quantities remains same in primary and secondary coils of an ideal transformer ? (Board Paper 2024)
Current, Voltage, Power, Magnetic flux
(A) Current only
(B) Voltage only
(C) Power only
(D) Magnetic flux and Power both

Answer: (D) Magnetic flux and Power both

Explanation:

For an ideal transformer,

$P_p=P_s$

Therefore power remains the same.

Also, the same magnetic flux links both coils.

Hence both magnetic flux and power remain unchanged.

Q. A resistor and an ideal inductor are connected in series to a 100 √2 V, 50 Hz ac source. When a voltmeter is connected across the resistor or the inductor, it shows the same reading. The reading of the voltmeter is : (Board Paper 2024)
(A) 100 √2 V
(B) 100 V
(C) 50 √2 V
(D) 50 V

Answer: (B) 100 V

Explanation:

Given source voltage,

$V=100\sqrt2,V$

Since voltmeter readings across resistor and inductor are equal,

$V_R=V_L$

Let each be $V$.

Then,

$100\sqrt2=\sqrt{V_R^2+V_L^2}$

$100\sqrt2=\sqrt{V^2+V^2}$

$100\sqrt2=\sqrt2,V$

$V=100,V$

Q. Assertion (A) : The capacitive reactance increases with the increase of the frequency (w) of applied ac voltage.
Reason (R) : The value of capacitive reactance (XC) is wC. (Board Paper 2024)

(A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of the Assertion.
(B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of the Assertion (A).
(C) Assertion (A) is true, but Reason (R) is false.
(D) Both Assertion (A) and Reason (R) are false.

Answer: (D) Both Assertion and Reason are false.

Explanation:

Capacitive reactance is

$X_C=\dfrac{1}{\omega C}$

When frequency increases, $X_C$ decreases.

Hence Assertion is false.

The Reason is also false because the correct formula is

$X_C=\dfrac{1}{\omega C}$

Q. In a series LC circuit connected to an ac source, with the increase in the frequency of the source, the net reactance : (Board Paper Comp 2023)
(a) increases linearly
(b) decreases linearly
(c) first increases to become maximum and then decreases to zero
(d) first decreases to become zero and then increases

Answer: (d) first decreases to become zero and then increases

Explanation:

Net reactance is

$X=X_L-X_C$

As frequency increases,

$X_L=\omega L$ increases,

while

$X_C=\dfrac{1}{\omega C}$ decreases.

At resonance,

$X_L=X_C$

So net reactance becomes zero.

Beyond resonance, net reactance increases again.

Q. An inductor, a capacitor and a resistor are connected in series across an ac source of voltage. If the frequency of the source is decreased gradually, the reactance of : (Board Paper 2023)
(a) both the inductor and the capacitor decreases.
(b) inductor decreases and the capacitor increases.
(c) both the inductor and the capacitor increases.
(d) inductor increases and the capacitor decreases.

Answer: (b) inductor decreases and capacitor increases

Explanation:

Inductive reactance:

$X_L=\omega L$

If frequency decreases, $X_L$ decreases.

Capacitive reactance:

$X_C=\dfrac{1}{\omega C}$

If frequency decreases, $X_C$ increases.

Q. Which of the following statements about a series LCR circuit connected to an ac source is correct? (Board Paper 2023)
(A) If the frequency of the source is increased, the impedance of the circuit first decreases and then increases.
(B) If the net reactance (XL — XC) of circuit becomes equal to its resistance, then the current leads the voltage by 45°.
(C) At resonance, the voltage drop across the inductor is more than that across the capacitor.
(D) At resonance, the voltage drop across the capacitor is more than that across the inductor.

Answer: (A) If the frequency is increased, the impedance first decreases and then increases.

Explanation:

Impedance is

$Z=\sqrt{R^2+(X_L-X_C)^2}$

As frequency approaches resonance,

$X_L$ and $X_C$ become equal.

Hence impedance decreases and becomes minimum at resonance.

After resonance, impedance increases again.

Therefore option (A) is correct.

Q. The emf generated by an AC generator is given by V=Vo sin ωt, where ω is angular frequency of armature of generator. What will be the emf if the angular frequency is doubled (Sample Paper 2026)
(A) V=Vo sin 2ωt
(B) V=2Vo sin ωt
(C) V=2Vo sin 2ωt
(D) V=Vo sin ωt

Answer: (C) $V=2V_0\sin 2\omega t$

Explanation:

For an AC generator,

$V_0=NAB\omega$

Peak emf is directly proportional to angular frequency.

If angular frequency is doubled,

$V_0′ = 2V_0$

and

$\omega’ = 2\omega$

Therefore,

$V = 2V_0\sin(2\omega t)$

Q. In a series LCR circuit, the voltage across the resistance, capacitance and inductance is 10 V each. If the capacitance is short circuited the voltage across the inductance will be (Sample Paper 2025)
(A) 10 V
(B) 10√2 V
(C) 10/√2 V
(D) 20 V

Answer: (C) 10/√2 V

Explanation:

Given,

$V_R=V_L=V_C=10,V$

Since

$V_L=V_C$

the circuit is at resonance.

Therefore,

$R=X_L$

After short-circuiting capacitor,

$Z=\sqrt{R^2+X_L^2}$

$Z=R\sqrt2$

Current becomes

$I’=\dfrac{V}{R\sqrt2}$

At resonance source voltage was

$V=10,V$

Therefore,

$V_L’=I’X_L$

$V_L’=\dfrac{10}{R\sqrt2}\times R$

$V_L’=10\sqrt2,V$

Q. The large scale transmission of electrical energy over long distances is done with the use of transformers. The voltage output of the generator is stepped-up because of (Sample Paper 2024)
(a) reduction of current
(b) reduction of current and voltage both
(c) power loss is cut down
(d) (a) and (c) both

Answer: (d) (a) and (c) both

Explanation:

When voltage is increased,

$P=VI$

For the same power, current decreases.

Transmission loss is

$P_{loss}=I^2R$

Lower current reduces power loss.

Therefore stepping up voltage:

  • reduces current
  • reduces transmission losses

Both statements are correct.

Q. A 20 volt AC is applied to a circuit consisting of a resistance and a coil with egligible resistance. If the voltage across the resistance is 12 volt, the voltage across the coil is- (Sample Paper 2022)
(i) 16 V
(ii) 10 V
(iii) 8 V
(iv) 6 V

Answer: (i) 16 V

Explanation:

For an RL circuit,

$V=\sqrt{V_R^2+V_L^2}$

$20=\sqrt{12^2+V_L^2}$

$400=144+V_L^2$

$V_L^2=256$

$V_L=16,V$

Q. The instantaneous values of emf and the current in a series ac circuit are- (Sample Paper 2022)
E = Eo Sin ωt and I= Io sin( ωt+π/3) respectively, then it is

(i) Necessarily a RL circuit
(ii) Necessarily a RC circuit
(iii)Necessarily a LCR circuit
(iv) Can be RC or LCR circuit

Answer: (iv) Can be RC or LCR circuit

Explanation:

Current leads voltage by

$\phi=\dfrac{\pi}{3}$

A leading current indicates capacitive behavior.

Both an RC circuit and a capacitively dominated LCR circuit can show this behavior.

Hence the correct answer is Can be RC or LCR circuit.

Q.Which among the following, is not a cause for power loss in a transformer- (Sample Paper 2022)
(i) Eddy currents are produced in the soft iron core of a transformer.
(ii) Electric Flux sharing is not properly done in primary and secondary coils.
(iii) Humming sound produed in the tranformers due to magnetostriction.
(iv) Primary coil is made up of a very thick copper wire.

Answer: (iv) Primary coil is made up of a very thick copper wire

Explanation:

Power losses occur due to:

  • Eddy currents
  • Flux leakage
  • Hysteresis loss
  • Magnetostriction

Using thick copper wire actually reduces resistance and decreases copper loss. Therefore it is not a cause of power loss.

Q. An alternating voltage source of variable angular frequency ‘w’ and fixed amplitude ‘V’ is connected in series with a capacitance C and electric bulb of resistance R(inductance zero). When ‘w’ is increased- (Sample Paper 2022)
(i) The bulb glows dimmer.
(ii) The bulb glows brighter.
(iii) Net impedance of the circuit remains unchanged.
(iv) Total impedance of the circuit increases.

Answer: (ii) The bulb glows brighter

Explanation:

Capacitive reactance,

$X_C=\dfrac{1}{\omega C}$

As frequency increases, $X_C$ decreases.

Therefore impedance decreases and current increases.

More current means more power in the bulb.

Hence the bulb glows brighter.

Q. A sinusoidal voltage of peak value 283 V and frequency 50 Hz is applied to a series LCR circuit in which R = 3 Ω, L = 25.48 mH, and C = 796 µF, then the power dissipated at the resonant condition will be- (Sample Paper 2022)
(i) 39.70 kW
(ii) 26.70 kW
(iii) 13.35 kW
(iv) Zero

Answer: (iii) 13.35 kW

Explanation:

At resonance,

$Z=R=3,\Omega$

RMS voltage,

$V_{rms}=\dfrac{283}{\sqrt2}$

$V_{rms}\approx200,V$

Power at resonance,

$P=\dfrac{V_{rms}^2}{R}$

$P=\dfrac{200^2}{3}$

$P=13333,W$

$P\approx13.35,kW$

Therefore the correct answer is 13.35 kW.

Disclaimer: The content that is present on our website is based on the NCERT Class 12 Physics textbook and is provided for educational purposes only. All the content and images have been taken from Physics Class 12 NCERT Textbook and CBSE Support material. Images and content shown above are the property of individual organizations and are used here for reference purposes only. To make it easy to understand, some of the content and images are generated by AI and cross-checked by the teachers.

← Back to Class 12 Physics

Leave a Comment